Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
100
(Continued)
Spotify/TIDAL/Deezer/
Internet Radio/Podcasts
Playback does not start.
The sound is interrupted.
• The station that does not broadcast cannot be
played back (or it will be skipped).
• The internet radio station may not be played back
depending on the broadcasting method or the
network condition.
• The content may not be played back properly
depending on the network condition.
• Depending on the internet connection
environment, the sound may be interrupted or it
may take some time to play back.
• Service may not be available depending on the
country or area.
• The services through Network Service are
operated by their respective service providers, and
service may be discontinued either temporarily or
permanently without notice.
• Change TIDAL sound quality setting for “Settings”
of “Technics Audio Center”. The performance may
be improved.
Cannot display the information properly.
• Station names, countries, regions, genres, track
names, album names, etc. which are managed by
the service provider, may not be displayed properly
depending on the broadcasting information.
Remote control
The remote control does not work properly.
• Press [NWP]/[CD] first to operate this unit.
(The remote control works only for the devices
supporting system control function when pressing
[AMP].)
• The batteries are depleted or inserted incorrectly.
(⇒ 22)
• To avoid interference, please do not put any
objects in front of signal sensor. (⇒ 16)
• If the remote control mode of the remote control
differs from that of this unit, match the mode of
the remote control to the mode of this unit. (⇒ 22)