Owner's Manual

18
(18)
Playback (Continued)
Basic
■
Disc formats supported by this unit
Super Audio CD (SACD)
Support
(2-channel only)
Commercially available CDs
(CD-DA)
Support
CD-R/CD-RW(CD-DA) Support
■ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
■ Clean discs
DO
DO NOT
Wipe with a damp cloth and then wipe dry with
a dry cloth.
■ Disc handling precautions
• Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
• Do not attach labels or stickers to discs.
• Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use the following discs:
- Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart shapes.
Incorrect display or play does not start.
• Make sure that the disc is compatible with this
unit.
• There is moisture on the lens. Wait for about an
hour and then try again.
• Unfinalised CD-R and CD-RW cannot be played
back.
Playback takes time to start.
• It may take some time for the disc to load if
there are a lot of tracks on it.
Pure Disc Playback
By disabling the network functions, etc. and this
unit operates exclusively for the playback of CDs
for the higher quality sound.
Press [CD] for 5 seconds or longer.
• A confirmation screen appears.
Press [OK].
Press [ ], [ ] to select “Yes” and then
press [OK].
Note
• Operating from “Technics Audio Center” app,
etc. are not available after setting.
• The programme playback cannot be set.
• Press again for 5 seconds or longer to cancel
and return to the normal mode.
Playing back music stored on the
USB device
Connect a USB device to the USB-A terminal
on the front of this unit. ( 09)
Press [NWP] or [CD].
Press [>INPUT<] repeatedly to select “USB
Front”.
Press [ ], [ ] to select an item and then press
[OK].
• Repeat this step to make further selections.
• Press [RETURN] to return to the previous
folder.
• Random/repeat playback can be set. ( 17)
• When using a USB HDD with this unit,
connect a USB HDD to the USB-A terminal on
the rear of this unit (USB Rear).
Using Bluetooth
®
You can listen to the sound from the Bluetooth
®
audio device from this unit wirelessly.
■ Pairing a Bluetooth
®
device
Turn on the Bluetooth
®
feature of the device and
place the device near this unit. (If a Bluetooth
®
device is already connected, disconnect it.)
Press [NWP] or [CD].
Press [>INPUT<] repeatedly to select
“Bluetooth”.
Press [MENU].
Press [ ], [ ] repeatedly to select “Pairing”
and then press [OK].
Press [ ], [ ] to select “Yes” and then press
[OK].
• “Pairing” is displayed, and this unit waits for
registering.
Select “Technics-SL-G700-
****
” from the
Bluetooth
®
device’s menu.