Owner's Manual
Table Of Contents
- Owner's Manual
- Service Manual
- Table of Contents
- Safety Precautions
- Warning
- Specifications
- Location of Controls and Components
- Troubleshooting Guide
- Disassembly and Assembly Instructions
- Types of Screws
- Disassembly Flow Chart
- Main Components and P.C.B. Locations
- Disassembly of T/T Rubber Matand Turntable Ass’y
- Disassembly of Insulator Unit
- Disassembly of Bottom Chassis Ass’y
- Disassembly of DC Motors
- Disassembly of Phono Out P.C.B.
- Disassembly of Tone Arm All Unit Ass’y, Queuing Knob and Armrest Ass’y
- Disassembly of Main P.C.B.
- Disassembly of SMPS P.C.B.
- Disassembly of Panel P.C.B.
- Measurements and Adjustments
- Block Diagram
- Wiring Connection Diagram
- Exploded View and Replacement Parts List
26
6.10. Disassembly of Main P.C.B.
• Refer to “Disassembly of T/T Rubber Mat and Turntable
Ass’y”.
• Refer to “Disassembly of Insulator Unit”.
• Refer to “Disassembly of Bottom Chassis Ass’y”.
Step 1 Detach 3P Wire at connector (P2102) on Main P.C.B..
Step 2 Detach 5P Wire at connector (P1005) on Main P.C.B..
Step 3 Remove 6 screws.
Step 4 Flip Main P.C.B..
Step 5 Remove Wire from Clamper.
Step 6 Detach 11P Wire at connector (P1001) on Main P.C.B..
Step 7 Detach 5P Wire at connector (P2101) on Main P.C.B..
Step 8 Detach 11P Wire at connector (P3101) on Main P.C.B..
Step 9 Remove Main P.C.B..
6.11. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of T/T Rubber Mat and Turntable
Ass’y”.
• Refer to “Disassembly of Insulator Unit”.
• Refer to “Disassembly of Bottom Chassis Ass’y”.
Step 1 Remove 2 screws.
Step 2 Remove 2 screws.
Step 3 Remove AC Holder.
Step 4 Remove 7 screws.
Step 5 Detach 5P Wire at connector (P1730) on SMPS P.C.B..
Step 6 Remove SMPS P.C.B..