Owner's Manual
Table Of Contents
- Owner's Manual
- Service Manual
- Table of Contents
- Safety Precautions
- Warning
- Specifications
- Location of Controls and Components
- Troubleshooting Guide
- Disassembly and Assembly Instructions
- Types of Screws
- Disassembly Flow Chart
- Main Components and P.C.B. Locations
- Disassembly of T/T Rubber Matand Turntable Ass’y
- Disassembly of Insulator Unit
- Disassembly of Bottom Chassis Ass’y
- Disassembly of DC Motors
- Disassembly of Phono Out P.C.B.
- Disassembly of Tone Arm All Unit Ass’y, Queuing Knob and Armrest Ass’y
- Disassembly of Main P.C.B.
- Disassembly of SMPS P.C.B.
- Disassembly of Panel P.C.B.
- Measurements and Adjustments
- Block Diagram
- Wiring Connection Diagram
- Exploded View and Replacement Parts List
15
5.4. Turntable Does Not Operate (No rotation)
Does
turntable rotate smoothly
when rotated with hand in power
OFF condition?
Turntable does not operate (No rotation)
YES (rotated)
NO (Not rotated smoothly)
Is the
turntable correctly
attached?
NO
YES
Normal condition. Finish.
YES
Attach the turntable correctly.
Does the
turntable rotate when the
power is turned ON after the connector
between the motor and MAIN PCB is
connected and disconnected?
Is the wire unit
between MOTOR and MAIN
PCB electrically conducted?
YES
NO
Replace Wire between
CN1 and P3101.
Replace MAIN PCB.
NO
Replace MAIN PCB.