Owner's Manual
Table Of Contents
- Owner's Manual
- Service Manual
- Table of Contents
- Safety Precautions
- Warning
- Specifications
- Location of Controls and Components
- Troubleshooting Guide
- Disassembly and Assembly Instructions
- Types of Screws
- Disassembly Flow Chart
- Main Components and P.C.B. Locations
- Disassembly of T/T Rubber Matand Turntable Ass’y
- Disassembly of Insulator Unit
- Disassembly of Bottom Chassis Ass’y
- Disassembly of DC Motors
- Disassembly of Phono Out P.C.B.
- Disassembly of Tone Arm All Unit Ass’y, Queuing Knob and Armrest Ass’y
- Disassembly of Main P.C.B.
- Disassembly of SMPS P.C.B.
- Disassembly of Panel P.C.B.
- Measurements and Adjustments
- Block Diagram
- Wiring Connection Diagram
- Exploded View and Replacement Parts List
13
5.3.2. No sound from LINE OUT Terminal
Set the external output switch
to "ON".
No sound from LINE OUT Terminal
(Large humming noise)
Is the
PHONO cable
to LINE OUT Terminal
correctly connected?
NO
Connect the PHONO cable correctly.
Is the
PHONO cable
damaged?
YES
YES
NO
NO
YES
Replace the damaged cable.
Is the
LINE OUT
terminal damaged?
Replace PHONO OUT PCB.
Go to next page.
External output switch
Back of main unit
PHONO
EARTH
PHONO OUT
OFF ON
L
R
LINE OUT
AUTO LIFT UP
L
R
OFF ON
OFF ON
R
a
When connecting the external output
terminals, do not connect the PHONO earth
lead.
a
Connecting to the PHONO input terminals
of the connected device produces abnormal
output, loud and with distorted sound quality.