Owner's Manual

Getting started
English
(13)
13
Note
AC power supply cord

Although the AC power switch is in the "OFF" position, the unit is not completely disconnected
from the mains. Remove the plug from the main electrical outlet if you will not be using the unit for
an extended period of time. Place the unit so the plug can be easily removed.
ヱラヰワヰ
ユモンヵラ
ヱラヰワヰチヰヶヵ
ヰョョ ヰワ
ロ
ン
ロリワユチヰヶヵ
モヶヵヰチロリョヵチヶヱ
ロ
ン
ヰョョ ヰワ
PHONO
PHONO
EARTH
ヱラヰワヰ
ユモンヵラ
ヱラヰワヰチヰヶヵ
ヰ
ロ
ン
R
L
R L
ヰョョ ヰワ
ン
Amplifier (not included)
Back of main unit
To a household
mains socket
PHONO
earth lead
PHONO
cable
Insert the AC power
supply cord up to a
point just before the
round hole.
External output switch
Make settings with the unit
turned off.
Connecting the PHONO output terminals
1
Turn off the unit and the
connected device, and disconnect
the AC power supply cord from the
socket.
3
Set the external output switch to
“OFF”.
2
Connect the PHONO cable and
PHONO earth lead to the PHONO
input terminals of the connected
equipment.

Adequate volume and sound quality cannot
be obtained when connected to the external
input terminals of the connected device.
4
Connect the AC power supply
cord.

Confirm the wattage of the AC outlet on
the connected equipment before using it
for this unit.
For the power consumption of this unit,
see the specifications. (

23)
PHONO
OUT
Attention

Tighten the PHONO earth terminal using a Phillips head screwdriver.