User Manual
Table Of Contents
- Read Before Use
- Operating Instructions
- Adjusting the Turbtable Startup/Brake Speed
- Owner's Manual
- Label Stickers
Attaching
the
cartridge
1 Attach a cartridge (store-bought)
tentatively.
Follow the cartridge's instructions
to
correctly attach it
to
the
head shell, and
tighten the screws lightly.
• If the mounting screws are included
in
the cartridge,
use
them.
• When playing
SP
records,
use
a cartridge
for
SP
records.
•
Use
a commercially available mini flat
screwdriver (4 mm [
5
132"]).
•
Be
careful
not
to
touch
the
stylus tip.
(Example)
Cartridge
(Lead wire)
Red
Green
White
Blue
Head
shell
Lead
wire
(Terminal)
R+
(Red)
R-
(Green)
L + (White)
L-
(Blue)
2 Adjust
the
overhang.
Use
the included overhang gauge.
CD
Fit
the overhang gauge
to
the head shell.
Overhang gauge
~
Move the cartridge
to
line the stylus
tip
up
with
the end
of
the gauge.
• The cartridge should
be
parallel on
the shell head when viewed from the
top
and side (the illustration
is
the
top
view).
® Tighten
the
screw
for
cartridge.
•
Be
careful
not
to
allow
the cartridge
to
slip
out
of
place.
Screw
for
cartridge
The
overhang
can
be
adjusted optimally.
(13} 13
English
-
G)
Cl)
a:.
::::,
lO
VI
,-+
OJ
::l-
et)
Q.