Operation Manual

Getting started
English
(13)
1
Attach a cartridge (store-bought)
tentatively.
Follow the cartridge’s instructions to
correctly attach it to the head shell, and
tighten the screws lightly.

If the mounting screws are included in
the cartridge, use them.

When playing SP records, use a cartridge
for SP records.

Use a commercially available mini flat
screwdriver (4 mm).

Be careful not to touch the stylus tip.
Attaching the cartridge

Fit the overhang gauge to the head shell.

Tighten the screw for cartridge.
The overhang can be adjusted optimally.
Screw for
cartridge
Overhang gauge
Head
shell
Head shell
Lead wire
Nuts
Washers
(Lead wire) (Terminal)
Red

R+ (Red)
Green

R- (Green)
White

L+ (White)
Blue

L- (Blue)
Screw for cartridge
Terminal
(Example)
52 mm
2
Adjust the overhang.
Use the included overhang gauge.

Move the cartridge to line the stylus tip up
with the end of the gauge.

The cartridge should be parallel on
the shell head when viewed from the
top and side (the illustration is the top
view).

Be careful not to allow the cartridge to
slip out of place.
Stylus tip
13
Cartridge
Stylus