SL-1200G / SL-1210G Owner's Manual Direct Drive Turntable System Manuel d’utilisation Platine tourne-disque à entraînement direct SL-1200G_1210G PP北米_Black model add（GAEから再展開）_20210706-.
Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Sans frontières, la musique est aussi intemporelle, touchant le coeur des gens en traversant les cultures et les générations. Tous les jours, nous attendons la révélation d’une expérience émotionnelle authentique à partir d’un son venu de nulle part.
Delivering the Ultimate Emotive Musical Experience to All At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music. We want people to experience music as it was originally intended and enable them to feel the emotional impact that enthuses and delights them. Through delivering this experience we want to support the development and enjoyment of the world’s many musical cultures. This is our philosophy.
Introduction Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. z About descriptions in these operating instructions - Pages to be referred to are indicated as “( 00)”. - The illustrations shown may differ from your unit. If you have any questions, visit: U.S.A.: http://shop.panasonic.com/support Canada: www.panasonic.ca/english/support Register online at http://shop.panasonic.com/support (U.S.
Table of contents z Before use Before use IMPORTANT SAFETY INSTRUCTIONS..................................... 6 Accessories............................................................................ 9 Parts Name.......................................................................... 10 z Getting started Getting started Putting the player together.................................................. 11 z Attaching the cartridge........................................... 11 z Fitting the turntable..........
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
午前９時５１分 Y INSTRUCTIONS The following mark and symbols are located on bottom of the unit. he g. A gthe into ugs, us. way, d or ed nnel. t unit. her se, Before use RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS (continued) THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Accessories In order to prevent damage during shipping some of the equipment has been disassembled. Please check and identify the supplied accessories. Turntable mat (1 pc.) (TEFX5019) Dust cover (1 pc.) (TTFA0572) EP record adaptor (1 pc.) SL-1200G : (TBMX5422) SL-1210G : (TBMX5421) Balance weight (1 pc.) SL-1200G : (TYL0541) SL-1210G : (TYL0295) Auxiliary weight small (1 pc.) (TPAKK61) Auxiliary weight big (1 pc.) (TPAKK62) Head shell (1 pc.) (TPBAA202) Overhang gauge (1 pc.
Parts Name Numbers such as ( 00) indicate reference pages.
Putting the player together Attaching the cartridge Attach a cartridge (store-bought) tentatively. Follow the cartridge’s instructions to correctly attach it to the head shell, and tighten the screws lightly. Adjust the overhang. Use the included overhang gauge. Fit the overhang gauge to the head shell. Head shell Getting started z If the mounting screws are included in the cartridge, use them. 2 Before use 1 z When playing SP records, use a cartridge for SP records.
Putting the player together (continued) In order to prevent damage during shipping some of the equipment has been disassembled. Put the player together in the following order. Attention Do not connect the AC power supply cord until set up is complete. 4 1 3 Turntable mat Handle carefully as this is heavy.
Fitting the turntable 1 Insert the center spindle in the center hole of the turntable. Attaching the head shell 5 Attention z Be careful not to touch the stylus tip. z Be careful when handling the turntable, as it is heavy. z Wipe off fingerprints or dirt with a soft cloth. Locking nut Slowly lower the turntable while aligning the rotor shaft fix holes (three locations) with the rotor shafts. Getting started 2 Fit the head shell with the cartridge into the tone arm.
Connections and installation z Turn off all units and disconnect the AC power supply cord from the outlet before making any connections. z Connect the AC power supply cord only after all other connections are completed. z Be sure to connect the PHONO earth lead. Otherwise mains hum may occur. z Refer also to the instruction manual of the connected device. 1 Connect the PHONO cables and PHONO earth lead to the PHONO terminals of the connected equipment.
Installation Install the unit on a horizontal surface protected from vibrations. Keep this unit as far as possible from speakers. Adjusting the height to make the unit horizontal Attention z Do not turn the insulators too far. Doing so may cause them to come off or damage them. Fit the dust cover 1 Hold the dust cover with both hands and insert it into the dust cover fitting parts ( 10) on the player. z To remove the dust cover, keep it open and lift it straight above.
Adjustment Horizontal balance Preparation Stylus pressure Preparation z First, remove the dust cover. z Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. z Lower the cue lever. z Turn the anti-skating control to “0”. z First, remove the dust cover. z Return the tone arm to the arm rest and fix it with the arm clamp. 1 1 Free the tone arm from the arm rest and adjust horizontal balance by turning the balance weight.
Anti-skating 2 Turn the balance weight to adjust to the appropriate stylus pressure for the cartridge. 1 Turn the anti-skating control to adjust it to the same value as the stylus pressure control. Getting started z The stylus pressure control will turn together with the balance weight. z Turn until the center line points to the appropriate stylus pressure.
Adjustment (continued) Tone arm height Make this adjustment only if the cartridge you are using makes it necessary. height (H), Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. Lower the cue lever, rest the stylus on a record and adjust the height control until the tone arm and record are parallel. Preparation z Put a record on the turntable. 1 When you don't know the cartridge Release the arm lock.
Armlift height Make an adjustment according to your cartridge if necessary. Preparation 1 Check the armlift height (distance between the stylus tip and record surface). If adjustment is needed, go to the step 2 . z The armlift height is factory-adjusted to 8 to 13 mm (5/16” to 33/64”). You can choose manual mode or auto mode. (Factory setting: Auto mode) Auto mode We recommend auto mode that can maximize performance of the product. It adjusts the "startup speed" (described below) automatically.
Playing records Preparation 1 Put a record on the turntable. 2 Take off the stylus cover and release the arm clamp. 1 2 Turn [ON/OFF] to turn the unit on. 33-1/3 The strobo light comes on. r/min is automatically selected and the indicator [33] lights. ・+6.4 ・ 3.3 0 ・- 3.3 % The turntable starts revolving. START･STOP 78 33 Press [START-STOP].
When play finishes Lift the cue lever, return the tone arm to the arm rest and lower the cue lever. 3 Press [RESET] to light the pitch control blue LED indicator. The unit plays at a preset pitch (33-1/3, 45 or 78 r/min) regardless of the [PITCH ADJ] position. Blue LED indicator z Fine adjustment to pitch ( 22) The electronic brake gently stops the turntable. Turn [ON/OFF] to turn the unit off. Clamp the tone arm with the arm clamp.
78 r/min) when stationary -3.3 % change in pitch when stationary Pitch control (fine adjustment to pitch) 1 Press [RESET] to turn off the blue LED light. 2 Press the pitch range select button to select the pitch range. z [×2] light on: ±16 % z [×2] light off: ±8 % 3 While the turntable is revolving Slide [PITCH ADJ]. The four rows of strobe mirrors around the edge of the turntable can assist you in measuring pitch. Strobe mirrors + 6.4 % change in pitch when stationary +3.
Maintenance Care of the parts Cleaning the dust cover Thoroughly clean dust off the stylus and record. z Take off the head shell with the cartridge and clean the stylus using a soft brush. Brush from the base to the tip. z Use a record cleaner to keep your records clean. Wipe the dust cover and cabinet with a soft cloth. When dirt is heavy, wring a wet cloth tightly to wipe the dirt, and then wipe it with a soft cloth.
Troubleshooting guide Updating the firmware Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your dealer. To improve operation or add new functions, the firmware for the unit is updated as needed basis. No power. z Is the AC power supply cord plugged in? Plug the cord in firmly. ( 14) There is power but no sound. Sound is weak.
Specifications General Tone arm section Power supply AC 120V, 60 Hz Type Static Balance Power consumption 14 W (Power ON) Approx. 0.2 W (Power OFF) Effective length 230 mm (9-1/16“) Dimensions (W×H×D) 453 x 173 x 372 mm (17-27/32“ × 6-13/16“ × 14-21/32“) Overhang 15 mm (19/32 “) Mass Approx. 18.0 kg (39.
ST-G30-SQT1222_mst.book ST-G30-SQT1222_mst.book 32 32 ページ ページ ２０１６年２月２２日 ２０１６年２月２２日 月曜日 月曜日 午後５時５２分 午後５時５２分 ST-G30-SQT1222_mst.book 32 ページ ２０１６年２月２２日 月曜日 午後５時５２分 ST-G30-SQT1222_mst.book 32 ページ ２０１６年２月２２日 月曜日 午後５時５２分 Others Others Others Others Limited Warranty (ONLY FOR U.S.A.) Limited LimitedWarranty Warranty(ONLY (ONLYFOR FORU.S.A.) U.S.A.) Limited Warranty (ONLY FOR U.S.A.) Limited Warranty (ONLY FOR U.S.A.) Limited Warranty (ONLY FOR U.S.A.) Others LimitedWarranty Warranty(ONLY (ONLYFOR FORU.S.A.) U.
ST-G30-SQT1222_mst.book 33 ページ ２０１６年２月２２日 月曜日 午後５時５２分 ST-G30-SQT1222_mst.book 33 ページ ２０１６年２月２２日 月曜日 午後５時５２分 Limited Warranty (ONLY FOR CANADA) Limited Warranty (ONLY FOR CANADA) Limited Warranty (ONLY FOR CANADA) Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. Limited Warranty (ONLY FOR 5770 CANADA) Panasonic Canada Inc. Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Canada Inc.
Panasonic Corporation of North America Panasonic Canada Inc. Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 www.panasonic.com En Cf TQBM0005-2 S0616AK3071 © Panasonic Corporation 2016-2021 SL-1200G_1210G PP北米_Black model add（GAEから再展開）_20210706-.
