User Manual

Specifications
General
Power supply
AC 120V, 60 Hz
Power 11 W (Power ON)
consumption
0.2 W (Power OFF)
Dimensions
453 x 173 x 372 mm
(WxHxD)
( 17 -2 7 / 32" X 6-13/ 16" X
14-21 / 32")
Mass
Approx. 11.5 kg
(25.4 lbs)
Operating
0 °C to +40 °c
temperature
(+32 °F to +104 ° F)
range
Operating 35 % to 80 % RH
humidity range (no condensation)
Turntable section
Type
Direct drive manual
turntable
Drive method
Direct drive
Motor
Brushless DC motor
Turntable Aluminum diecast
Diameter: 332 mm
( 13-5/ 64")
Mass: Approx. 2.5 kg
(5.51 lbs)
(including a rubber sheet)
Turntable speeds 33-1 / 3, 45 and 78 rpm
Variable range
±8 % and ±16 %
pitch
Starting torque
2.2 kg-cm (1.91 lb-in)
Build-up 0.7 s. from standstill to
characteristics 33-1 / 3 rpm
Braking system Electronic brake
Wow and flutter 0.025 % W.R.M .S.
(J IS C5521)
Rumble 78 dB (IEC 98A weighted)
I
T t' one arm sec 10n
I
Type
Static Balance
Effective length 230 mm (9-1 / 16")
Overhang
15mm(19 / 32")
Tracking error Within 2° 32' (at the outer
angle groove of 30 cm (12")
record)
Within 0° 32' (at the inner
groove of 30 cm (12")
record)
Offset angle
22°
Arm-height
0 - 6 mm (O" - 15 / 64")
adjustment range
Stylus pressure
0 - 4 g (direct reading)
adjustment range
Head shell weight
Approx. 7 .6 g
Applicable
(Without the auxiliary weight)
cartridge weight
5.6 to 12 .0 g
range
14.3 to 20. 7 g (including the
head shell)
(With the auxiliary weight)
10.0to16 . 4g
18.7 to 25.1 g (including the
head shell)
Head shell
1.2 mm cp 4-pin terminal lug
terminal lug
Specifications are subject to change without
notice.
( 27 ) 27
English