User Manual
Table Of Contents
- Read Before Use
- Operating Instructions
- Adjusting the Turbtable Startup/Brake Speed
- Owner's Manual
- Label Stickers
Troubleshooting
guide
Before requesting service, make the
below
checks. If you are
in
doubt
about
some
of
the check
points, or if the remedies indicated
in
the chart
do
not
solve the problem, contact your dealer.
p o power.
•
Is
the
AC
power
supply cord plugged in?
-+Plug
the mains lead
in
firmly.
(¢
16)
1T
here
is
power but no sound.
I Sound
is
weak.
• Are connections
to
the amplifier/ receiver's PHONO terminals correct?
-+Connect the PHONO cables
to
the amplifier's PHONO
input
terminals.
(¢
16)
I Left and right sounds are reversed.
• Are the stereo connection cable connections
to
the amplifier or receiver reversed?
-Double
check
all
connections.
(¢
16)
• Are connections
of
the head shell's lead wires
to
the cartridge terminals correct?
-+Double check
all
connections.(¢
13)
p umming
is
heard during play.
• Are there other appliances or their
AC
power
supply cord near the stereo connection cable?
-+Separate the appliances and their
AC
power
supply cord
from
this unit.
•
Is
the earth lead connected?
-+Make sure the earth lead
is
correctly connected.
(¢
16)
The Strobe light or the blue indicator blinks.
Perform the following operation
when
the strobe light or the blue indicator blinks.
The symptom may be improved.
CD
Turn [ON/
OFF]
to
OFF.
~
Pull
out
the
power
plug,
wait
for
three seconds, and then insert
the
plug again.
® Turn [ON /
OFF]
to
ON
and press
[START-STOP]
to
rotate the turntable.
• If the strobe light or the blue indicator blinks again, check which one
is
blinking and contact our
service representative.
26 (26)
English