User Manual
Table Of Contents
- Read Before Use
- Operating Instructions
- Adjusting the Turbtable Startup/Brake Speed
- Owner's Manual
- Label Stickers
Adjustment
Horizontal balance
Preparation
•
First,
remove the dust cover.
• Remove the stylus cover, taking care
not
to
damage the stylus, then release the arm
clamp.
• Lower the cue lever.
• Turn the anti-skating control
to
"O".
1 Free
the
tone
arm
from
the
arm
rest and adjust horizontal balance
by turning
the
balance
weight.
Hold the
tone
arm and turn the balance
weight
in
the
arrow
direction
to
adjust
the balance until the arm
is
approximately
horizontal.
• Take care
not
to
allow the stylus tip
to
touch the
turntable or main
unit.
Balance weight
--Hold
here
't?
to
turn
X@=-
I ~
?J777777777h?v»
/
I
x~
, /
18 (18)
English
Balanced and the tone
arm
is
parallel
to
the
turntable.
The
balance weight
is
too
far forward.
The
balance weight
is
too
far back.
Stylus
pressure
Preparation
• First, remove the dust cover.
• Return the
tone
arm
to
the arm rest and fix it
with
the arm clamp.
1 Turn
the
stylus pressure control
until
"O"
comes
to
the
center line
oftherearofthetonearm.
• Hold the balance
weight
still while
doing this.
( Note )
Stylus pressure
control
r°7
~-
Hold here
~to
turn
• Refer
to
the user's guide
for
your stylus
for
the appropriate sty I
us
pressure.