User Manual
Table Of Contents
- Read Before Use
- Operating Instructions
- Adjusting the Turbtable Startup/Brake Speed
- Owner's Manual
- Label Stickers
Connections
and
installation
• Turn
off
all
units and disconnect the
AC
power supply cord from the
outlet
before making any
connections.
• Connect the
AC
power supply cord only after
all
other connections are completed.
•
Be
sure
to
connect the
PHONO
earth lead. Otherwise mains hum may occur.
• Refer also
to
the instruction manual
of
the connected device.
1 Connect
the
PHONO cable and
PHONO earth lead
to
the
PHONO
input terminals
of
the connected
equipment.
• You will
not
have adequate volume or
sound quality if the connected amplifier
has
no
PHONO
input terminals.
2 Connect
the
AC
power
supply
cord.
• Confirm the
wattage
of
the
AC
outlet on
the connected equipment before using it
for
this unit.
(This unit consumes
11
W.)
Connecting
to
an integrated amplifier or component system
Amplifier (not included)
PH
ONO
PHONO
EARTH @
[g
(®)
PHONO
cable
PHONO
earth lead
(
Note
)
Back
of
main unit
AC
power
._s•u•p•pl•y•co•r•d-•
+To
a household
mains socket
• Although the
AC
power switch
is
in
the
"OFF"
position, the unit
is
not
completely disconnected
from the mains. Remove the plug from the main electrical outlet if you will
not
be
using the unit
for
an
extended period
of
time.
Place
the unit
so
the plug
can
be
easily removed.
16 {16)
English