User Manual


The confirmation lamp blinks the
specified number of times according to
the current setting when you press the
H or L torque button.
→
(Blinks three times)
Example)
When the setting is [3].
TORQUE
L
H
(Blinks five times)
Example)
When the setting is [5].

The confirmation lamp blinks the
specified number of times according to
the current setting when you press the F
or S brake button.
→
BRAKE
S
F
TQBM7059
S047AK0
Adjusting the turntable startup/brake speed
󱾀
Press the centre of the button lightly.
→

To change the setting, press the H or L
torque button while the lamp is lit for
two seconds.
TORQUE
L
H
(Lit two seconds)
Direct Drive Turntable System
Model No.
SL-1200GR / SL-1210GR
TORQUE
BRAKE
S
F
L
H
Confirmation lamp
BRAKE button ([1] - [5])
S (Slow) ..............Reduce the brake speed(-1)
F (Fast) ................ Increase the brake speed(+1)
Torque button ([1]
- [3])
L (Low) ............... Reduce the torque(-1)
H (High)
............. Increase the torque
(+1)
Brake speedStartup speed
→→
( Blinks
one time)
Example) When the setting is [1].

After you press the torque button, the
confirmation lamp blinks the specified
number of times showing the new
setting, stays lit for two seconds and
then goes off.
( Lit two
seconds)
(Off/end)

After you press the brake button, the
confirmation lamp blinks the specified
number of times showing the new
setting, stays lit for two seconds and
then goes off.
→→
( Blinks
three times)
Example) When the setting is [3].
( Lit two
seconds)
(Off/end)

To change the setting, press the F or
S brake button while the lamp is lit for
two seconds.
BRAKE
S
F
→
(Lit two seconds)
You can select from three time options for the turntable
to reach constant speed after [START-STOP] is pressed.
Press the H button to increase the torque (the power
required to rotate) and shorten the time to stabilise
rotation. (The factory setting is [3]: highest.)
You can select from five time options for the turntable
to stop after [START-STOP] is pressed.
(You can change the brake power.)
(The factory setting is [5]: fastest.)