Operating instructions

English
(12)
12
Putting the player together
Connecting to the PHONO terminals and AC IN terminal
1
Take out the player from the
package, attach the “FRONT
styrofoam” and place the player
with its front side down so that
you can make connection to the
PHONO terminals and AC IN
terminal on the back side.
2
Connect the supplied PHONO
cable, PHONO earth lead, and
AC power supply cord.
Connect the PHONO cable, PHONO earth
lead and AC power supply cord.
2
Attach the “FRONT styrofoam” and
place the player with its front side down.
1
Be careful not to tip over the player.
Insert the AC power supply cord
up to a point just before the
round hole.
Make connection to the PHONO terminals and AC IN terminal before setting up or installing
the player.
Attention
Connecting the PHONO earth lead to
the player and amplifier.


Turn the terminal to the left to loosen.
k
Insert the earth lug and tighten the
terminal securely.
(Black)
(White)
(Red)