Operation Manual

38
Settings
Sound adjustment, Other settings (Continued)
Firmware updates
“F/W Update”
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
Downloading takes approx. 15 minutes.
Do not disconnect the AC mains lead or
turn this unit to standby while updating.
• The progress is displayed as “Updating
%”
while updating. ( stands for a number.)
Note
• During the update process, no other operations
can be performed.
• If there are no updates, “Firmware is Up To
Date” is displayed after step 3.
Update via Internet
■
Preparation
• Connect this unit to the network. ( 18)
- Make sure that the network is connected to
the Internet.
1 Press [SETUP].
2 Press [
], [ ] repeatedly to select
“F/W Update” and then press [OK].
3 Press [
], [ ] to select “Internet”
and then press [OK].
4 Press [
], [ ] to select “Yes” and
then press [OK].
• The progress is displayed as “Updating %”
while updating. ( stands for a number.)
• When the update has finished successfully,
“Success” is displayed.
5 Disconnect the AC mains lead and
reconnect it after 3 minutes.
Note
• Downloading may take longer or may not
work properly depending on the connection
environment.
Update via USB flash memory
■
Preparation
• Download the latest firmware on the USB flash
memory. For details, refer to the following
website.
http://www.technics.com/support/firmware/
1 Connect the USB flash memory with
new firmware.
2 Press [SETUP].
3 Press [
], [ ] repeatedly to select
“F/W Update” and then press [OK].
4 Press [
], [ ] to select “USB” and
then press [OK].
5 Press [
], [ ] to select “Yes” and
then press [OK].
• The progress is displayed as “Updating %”
while updating. ( stands for a number.)
• When the update has finished successfully,
“Success” is displayed.
6 Disconnect the AC mains lead and
reconnect it after 3 minutes.
Note
• Downloading may take longer depending on
the USB flash memory.