Manualshelf

Operation Manual

ManualsBrandsTechnics ManualsAudioSCC500GN
31323334353637383940
33
Operations
Operations using the dedicated
app
“Technics Music App”
If you install the dedicated app “Technics
Music App” (free of charge) on your tablet/
smartphone, you can control this unit and the
SC-C500 using a wide variety of functions.
For details, visit:
www.technics.com/support/
Playing back content stored on
the DLNA server by controlling
it from a DMC
By controlling a DMC (Digital Media Controller)
compatible device, you can play back music
stored on the DLNA server on this unit (DMR—
Digital Media Renderer).
1 Press [ ] to turn this unit on.
2 Operate the DMC compatible device
and connect to this unit.
• The device name of this unit will be
displayed as “Technics SC-C500
******
”
*
1, 2
.
• For details on how to use DMC compatible
devices, refer to the operating instructions
of the devices or the software.
Note
• You cannot use random repeat playback in
combination with other playback modes.
• When you operate DMC, playback of other
audio sources will stop and DLNA output will
have priority.
• Depending on the contents and the connected
equipment, operations or playback may not be
possible.
• This unit does not guarantee connection with
all DMC applications. Use the dedicated app
“Technics Music App”.
*
1: “
******
” stands for a digit that is unique to
each set.
*
2: The device name can be changed from “This
unit’s name on the network”. ( 23)
1-Track:
Only plays the selected track. (“1
” is
displayed.)
All:
All tracks are repeated. (“
” is displayed.)
• Setting is available even when the input source
is switched to “CD” ( 24) or “USB” ( 26).
Random repeat playback
“Random”
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Random” and then press [OK].
3 Press [
], [ ] to select “On” and then
press [OK].
• All tracks in the folder are repeated randomly.
(“RND” and “ ” are displayed.)
• During random playback, you cannot skip to
tracks which have been played, and tracks may
be played more than once.
• Setting is available even when the input source
is switched to “CD” ( 25) or “USB” ( 26).