Operation Manual

28
Operations
Using Bluetooth
®
■
Pairing a Bluetooth
®
device
• Turn on the Bluetooth
®
feature of the device
and place the device near this unit.
• If a Bluetooth
®
device is already connected,
disconnect it. ( 29)
1 Press [ -PAIRING].
2 Press [MENU].
3 Press [
], [ ] repeatedly to select
“Pairing” and then press [OK].
4 Press [
], [ ] to select “Yes” and
then press [OK].
• “Pairing” is displayed, and this unit waits for
registering.
5 Select “SC-C500” from the Bluetooth
®
device’s Bluetooth
®
menu.
• The name of the connected device is
indicated on the display.
• MAC address may be displayed before “SC-
C500” appears. (e.g. 6C:5A:B5:B3:1D:0F)
Note
• You can also enter pairing mode by pressing
and holding [ -PAIRING] when the input
source is “Bluetooth”.
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this unit.
If a 9th device is paired, the device that has not
been used the longest will be replaced.
You can listen to the sound from the Bluetooth
®
audio device from this unit wirelessly.
• Refer to the operating instructions of the Bluetooth
®
device for details.
■
Listening to music stored on a Bluetooth
®
device
1 Press [ -PAIRING].
• “Ready” is indicated on the display.
2 Select “SC-C500” from the Bluetooth
®
device’s Bluetooth
®
menu.
• The name of the connected device is
indicated on the display.
3 Start playback on the Bluetooth
®
device.
Note
• This unit can only be connected to one device
at a time.
• When “Bluetooth” is selected as the input
source, this unit will automatically try and
connect to the last connected Bluetooth
®
device. (“Linking” is displayed during this
process.)