Operation Manual

26
Operations
Using USB device
1 Connect a USB device to the unit.
2 Press [USB].
• The folder/content selection screen will be
displayed.
3 Press [ ], [ ] to select an item and
then press [OK].
• Repeat this step to make further selections.
• Press [RETURN] to return to the previous
folder.
Operations during playback
Stop
Pause
• Press again to restart play.
Skip
Search
• On the unit: touch and hold
[ ] or [ ].
Viewing
available
information
[INFO]
• This operation may not be available for some
formats.
Repeat playback
“Repeat”
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Repeat” and then press [OK].
3 Press [
], [ ] to select an item and
then press [OK].
1-Track:
Only plays the selected track. (“1
” is
displayed.)
All:
All tracks in the folder are repeated. (“
” is
displayed.)
• Setting is available even when the input source
is switched to “CD” ( 24) or “DMP” ( 32).
Random repeat playback
“Random”
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Random” and then press [OK].
3 Press [
], [ ] to select “On” and then
press [OK].
• All tracks in the folder are repeated randomly.
(“RND” and “
” are displayed.)
• During random playback, you cannot skip to
tracks which have been played, and tracks may
be played more than once.
• Setting is available even when the input source
is switched to “CD” ( 25) or “DMP” ( 33).
Connect a USB device to the unit, and you can play
back music stored on the USB device.
• Refer to “USB” ( 45) for information about the
USB device this unit can play back.
USB device