Operation Manual

25
Operations
Random repeat playback
“Random”
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Random” and then press [OK].
3 Press [ ], [ ] to select “On” and then
press [OK].
• All tracks are repeated randomly.
(“RND” and “ ” are displayed.)
• Setting is available even when the input source
is switched to “USB” ( 26) or “DMP” ( 33).
Programme playback
“Program”
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Program” and then press [OK].
3 Press [
], [ ] to select “On” and then
press [OK].
• “Program Mode” screen is displayed.
4 Press the numeric buttons to select
tracks.
• Repeat this step to make further selections.
5 Press [ ] to start playback.
Stop
Press [
].
• Programmed content is
maintained.
Check the
programmed
order
Press [ ] or [ ] in the stop
mode.
Add tracks Do step 4 in the stop mode.
Clear the last
track
Press [CLEAR] in the stop
mode.
• It is not possible to select
and clear the desired
programmed track.
• To cancel programme mode (The programme
memory will be cleared.)
Press [ ] in the stop mode.
Press [ ], [ ] to select “Yes” and then
press [OK].
• To cancel programme mode (The programme
memory won’t be cleared.)
Press [MENU].
Press [ ], [ ] repeatedly to select
“Program” and then press [OK].
Press [ ], [ ] to select “Off” and then
press [OK].
Note
• The programme memory is cleared when
replacing a CD.
• The programme mode is cancelled when
random repeat playback is set.