Setup Guide

5
SETUP & USER GUIDE
Copyright © 2012 Technicolor. All rights reserved.
DMS-CTC-20120508-0000 v1.0.
1.2 Hardware Overview
1.2.1 Front Panel
1
2
3
4
5
6
No. LED Description
1 Power LED Lights up when the device is powered on.
▪ Solid GREEN – Indicates normal operation.
▪ Flashing GREEN – Firmware upgrade in progress.
▪ Solid RED – Indicates malfunction.
▪ Off – The device is powered off.
2 Ethernet LED
▪ Solid GREEN – A wired connection is established.
▪ Flashing GREEN – Data transmission is in progress.
▪ Off – No wired connection detected.
3 WLAN LED Lights up to indicate wireless connection.
▪ Solid GREEN – Wireless connection is established.
▪ Flashing GREEN – Data transmission is in progress.
▪ Off – Wireless connection is disabled.
4 WPS LED Lights up to indicate the Wi-Fi Protected Setup (WPS) connection status.
▪ Solid GREEN – WPS is enabled.
▪ Flashing RED – Failure.
▪ Off – WPS is disabled.
5 Broadband (DSL)
LED
Lights up to indicate DSL connection status.
▪ Flashing GREEN (slow) – DSL line detection in progress.
▪ Flashing GREEN (fast) – Attempts to synchronize with DSL line.
▪ Solid GREEN – DSL connection is established.
▪ Off – Modem power is off.