Setup Guide

10
SETUP & USER GUIDE
Copyright © 2012 Technicolor. All rights reserved.
DMS-CTC-20120508-0000 v1.0.
3 Configure the Computer
This chapter will guide you on how to configure your computer according to the operating system you
are using.
▪ Windows

XP, see below.
▪ Windows

Vista, see page 10.
▪ Windows

7, see page 11.
3.1 Windows XP
If you are using Windows

XP, follow the instructions below to configure your computer.
1
Click Start > Control Panel > Network Connections.
2
Right-click Local Area Connection, then click Properties.
3
On the network components list, make sure that Internet
Protocol (TCP/IP)
is checked. If not, check it to enable the
Properties button.
4
Select Internet Protocol (TCP/IP), and then click
Properties.
5
On the General tab, select Obtain an IP Address
automatically and Obtain DNS server address
automatically.
6
Click OK.
General Page
3.2 Windows Vista
If you are using Windows

Vista, follow the instructions below to configure your computer.
1
Click Start > Control Panel > Network and Internet
Connections > Network Connections.
2
Right-click Local Area Connection, then click Properties.
3
On the General tab, make sure that Internet Protocol
(TCP/IP) is checked. If not, check it to enable the
Properties button.
4
Select Internet Protocol (TCP/IP), and then click
Properties.
5
Select Obtain an IP Address automatically and
Obtain DNS
server address automatically.
6
Click OK.
General Page