Operation Manual

Page 56 / 83
8. 5 GHz\Advanced
This page allows configuring advance wireless settings.
Fig. 2-37 Wireless\5 GHz\Advanced
 Country: Please select the country code.
 Mac Address: The MAC address for this wireless device will be displayed in this field
automatically.
 Beacon Interval: Set the period of beacon transmissions to allow mobile stations to locate and
identify a BSS. The measure unit is “time units” (TU) of 1024 microseconds. (Value range: 1~65535)
 DTIM Interval: The value you set here is used to inform mobile stations when multicast frames that
have been buffered at the Wireless Voice Gateway will be delivered and how often that delivery
occurs. (Value range: 1~255)
 Fragment Threshold: Set the number of the fragmenting frames to make the data to be delivered
without errors induced by the interference. Frames longer than the value you set here are fragmented
before the initial transmission into fragments no longer than the value of the threshold. (Value range:
256~ 2346)
 RTS Threshold: Set the value for sending a request to the destination. All the frames of a length