Operation Manual

Page 53 / 83

5. 2.4 GHz\WPS

This page allows you to configure WPS setting. Wi-Fi Protected Setup

(WPS) is an easy and secure

way of configuring and connecting your Wireless access point. In this case, the Wireless Voice Gateway

is the Access Point (AP), and Your PC (or Wireless Device) is called the STA. When configuring your

Wireless Network via WPS, Messages are exchanged between the STA and AP in order to configure the

Security Settings on both devices.

Fig. 2-34

Wireless\2.4GHz\WPS

 WPS: It will help you to Enable or Disable the WPS feature. To enable you need to select WPS, to

disable you need to select Disabled.

 PIN: This is the PIN for authentication. Enter the PIN and the click “PIN start” for start PIN

connection.

 PBC: Click “PBC start” for starting it.