Operation Manual

Page 19 / 83
CHAPTER 2: WEB CONFIGURATION
To make sure that you can access the Internet successfully, please check the following first.
1. Make sure the connection (through Ethernet) between the Wireless Voice Gateway and your
computer is OK.
2. Make sure the TCP/IP protocol is set properly.
3. Subscribe to a Cable Company.
Accessing the Web Configuration
The Wireless Voice Gateway offers local management capability through a built-in HTTP server and a
number of diagnostic and configuration web pages. You can configure the settings on the web page and
save them to the device.
Once your host PC is properly configured; please proceed as follows:
1. Start your web browser and type the private IP address of the Wireless Voice Gateway on
the URL field: 192.168.0.1
2. After connecting to the device, you will be prompted to select a Country and Language.
This page will be brought to you at the first login if the device has been set to user or
operator factory defaults. Select the country and language that you preferred and then click
“Next” for proceeding to Login page.
Fig2-1 Country and Language page