MANUEL D’UTILISATION - BEDIENUNGSANLEITUNG - MANUALE DI UTILIZZAZIONE - USER MANUAL MANUAL DE UTILIZACIÓN - GEBRUIKSAANWIJZING - BRUKSANGVISNING %(7-(1,1*69(-/('1,1* - FOLHETO DE UTILIZAÇÃO 0 ( 7 ( : (
de couv.
About this manual This document is common to several television models. Therefore, certain functions or settings may not apply to the model you have purchased The position of the ON/OFF switch differs depending on the model. It may be located on the front or on the right-hand side of your set (see the drawing inside the cover page of your manual). About safety To ensure your own safety and safe operation of the equipment, observe the following instructions thoroughly.
Contents GB Using the remote control and fitting the batteries. How to call up a menu and how to select a function, a setting or an option. About this manual . . . . . . . . . . . . . . . . . . . 1 About the switch . . . . . . . . . . . . . . . . . . . . . 1 About safety . . . . . . . . . . . . . . . . . . . . . . . . 1 About cleaning . . . . . . . . . . . . . . . . . . . . . . 1 About degaussing . . . . . . . . . . . . . . . . . . . 1 Basic connections . . . . . . . . . . . . . . . . . . . .
Basic connections Basic connections The mains plug (1) supplies power to the television. The television must only be plugged in to a 220-240 V - 50 Hz power supply. It must never be plugged in to a DC source. If the plug comes away from the lead, never attempt to plug it in: this could cause electrocution. Continental Europe If you connect an appliance to the aerial jack, you must give it a channel number.
Remote control Remote control Display of channel, time, sound (yellow This key is active only when using the Teletext (blue key) button) (and zoom for models with zoom) Call up programme list Standby GB (green button) Call up Teletext / Toptext / Fastext function (purple button) Reminder of picture preferences (red button) Right/Left Selection within menus and Zoom Function (for models with this function) Confirm an action or validate a menu option Go to adjustment function MENU To leave a men
Navigation principles Navigation principles Calling up the Installation main menu INSTALLATION MAIN MENU If there is no menu displayed on the screen, key on the remote press and hold the control. The settings SUMMARY is displayed first, followed by the INSTALLATION MAIN MENU which you can use to operate your television.
Installing your television for the first time Installing your television for the first time First plug the television into a mains power outlet and to the external aerial or a cable network, then switch on using located on the front or the side of your set. the ON/OFF switch When you switch on your television for the first time, the language selection menu* is displayed (Fig. 1). If this does key on the television until this menu appears.
Automatic installation Automatic installation The Automatic installation function is useful if you have to go through the installation procedure again, such as when moving house. This function deletes all previously memorised programmes. To install a new channel, you should use the Manual programming function. Your television will only search for channels corresponding to the selected country, so see the Manual programming chapter to install any channels not found.
Programme organisation Programme organisation During automatic installation, your television will search for the channel name and assign it a programme number according to the selected country. You can use the PROGRAMME ORGANISATION menu to name any channel name not found, to change the order in which the channels are displayed, or to delete channels for which reception is too poor. Follow the messages at the bottom of the screen. For further details, read the information below.
Manual programming Manual programming The manual installation function is useful if some programmes have not been installed even after AUTOMATIC INSTALLATION. , the SUMMARY is 1. Press and hold displayed first, followed by the INSTALLATION MAIN MENU. 2. Select the line marked Manual programming. . 3. Display the menu using 4. Now continue by following the messages at the bottom of the screen. For further details, read the information below.
Personal settings Personal settings GB 1. Press and hold the key: the SUMMARY is displayed first, followed by the INSTALLATION MAIN MENU. 2. Select the line marked Personal settings. INSTALLATION MAIN MENU Exit Manual programming 3. Display the menu using . 4. Continue by following the messages at the bottom of the screen. Auto installation For further details, read the information below. Personal settings Menu language : Select the language in which the menus are to be displayed.
Preferences Preferences 1. Display the SUMMARY by pressing and releasing the key on the remote control . 2. Select the line marked Preferences. . 3. Display the menu using Show program. number : If you wish to permanently display the number of the programme you are watching, tick the box using the Left/Right keys. Press the Left/Right keys again to deactivate this function. PREFERENCES Return Show program.
Daily viewing Daily viewing Picture Adjustment GB Display the SUMMARY using the key on the remote control. Select Picture. Validate . The PICTURE menu is displayed. using Select and set the proposed options. Use the information below to help you. Brightness, Colour, Contrast, Sharpness: Select each of these lines one after the other and set as required. Contrast expand : Select this line then choose the desired Contrast expand setting (High or Low).
Daily viewing Time Display the SUMMARY using the key on the remote control. Select the line marked . The TIME menu is Time. Validate using displayed. Sleep timer : Use the Left/Right keys to choose how long you wish to view before the television switches off. The television will switch off automatically at the end of this period. To cancel, set to 00:00. One minute before switching off, a message will inform you that the television is about to go off.
Daily viewing List of Channels GB This list contains up to 10 pages. The number of pages depends on the number of programmes memorized. For each programme, the list indicates the station name or type and the programme number. The 3 AV programmes are listed on page 11. To display the list, press the key on the remote control or key on the remote control. Select the Display the SUMMARY using the . line marked List. Validate using The page displayed is the page containing the programme you are watching.
Daily viewing Selecting Programmes GB For channels 1 to 9, press the number key corresponding to the desired channel on the remote control. For programme numbers higher than 10, press the key on the remote control: ”- -” appears on the screen. Now use the number keys on the remote control to enter first the tens digit then the units digit. If you press while ”- -” is already displayed, the display returns to 0- , in which case you can only select programmes 1 to 9.
Teletext Teletext GB Certain channels broadcast an electronic news page service with a range of different information services. The presentation and use of the Teletext differ from one country to another and from one programme to another (Teletext, Fastext or Toptext). Press the key to display the Teletext Index (page 100). A message will inform you if the programme you are watching has no Teletext service.
Other Connections Other Connections The CINCH Video and Audio sockets (1)* are provided to connect a VHS or 8mm camcorder. The S and CINCH Audio sockets (1)* are provided to connect a S-VHS or Hi-8 camcorder. GB To use the appliance you have connected, press the key several times until the AV3 programme is selected on the screen. When you switch off the connected appliance, the television will remain on the AV3 programme and you must use the numerical keys on the remote control to select a programme.
THOMSON multimedia 46/47 Quai A.
