Quick Setup Guide

4
2 Press the power button (
) on the back panel.
Wait until the LED becomes solid blue. This can take several minutes!
Do not power o your gateway or unplug any cables!
6. Connect your network devices
We recommend you to first connect one computer/tablet (if possible via a wired
connection), then complete the rest of the procedure and as a final step connect the
other devices.
6.1. Connect your wired (Ethernet) devices
If you want to connect a device using a wired (Ethernet) connection:
1 Take the yellow Ethernet cable.
2 Connect one end of the Ethernet cable to one of the yellow Ethernet ports of your
gateway.
3 Connect the other end of the Ethernet cable to your device.
4 Connect your other Ethernet devices.
5 We recommend you to first configure your gateway (see “7. Configure your
gateway to your needs (optional)” on page6) before connecting your Wi‑Fi
devices (see “6.2. Connect your Wi‑Fi devices” on page4).
6.2. Connect your Wi‑Fi devices
Your gateway has two Wi‑Fi access points:
• The 5 GHz access point oers superior transfer rates, is less sensitive to
interference and allows you to connect Wi‑Fi6 (IEEE802.11a/n/ac/ax) devices that
support 5GHz.
• The 2.4 GHz access point allows you to connect Wi‑Fi6 (IEEE802.11b/g/n/ac/ax)
devices. Use this access point for Wi‑Fi devices that don’t support 5GHz.