User's Manual

Connections and Setup
7
EN
Back panel audio sockets
DVD/VCR AUDIO OUT L (left) and R (right) sockets -
DVD EXCLUSIVE AUDIO OUT L (left) and R (right) sockets
These are analogue audio output sockets.The AUDIO L
socket and cable are white, while the AUDIO R socket
and cable are red. Connect the DVD/VCR AUDIO L and
R sockets to the television set’s AUDIO L and R sockets
using audio cables (not provided).
Note: If your television set only has one audio socket connect it
to the DVD player’s left socket (white).
The DVD exclusive sockets are dedicated to the DVD
player and offer a higher level of sound quality than the
DVD/VCR ones.
Coaxial digital audio output (COAXIAL) /
Optical digital audio output (OPTICAL)
These sockets offer a higher level of sound quality
compared to that provided using an analogue audio
connection. Use one of these sockets to connect your
DVD Player to an amplifier equipped with two-channel
digital stereo (PCM) or to an Audio/Video receiver
equipped with a multi-channel decoder (Dolby Digital,
MPEG 2 or DTS) using a digital coaxial or optical cable
(not supplied).
Back panel video sockets
DVD/VCR VIDEO OUT socket
This socket (yellow) is also known as a composite video
socket. The video cable (not supplied) usually comes with
two audio cables (black and white). The picture quality
obtained using a video connection is poorer compared to
that obtained using a Scart connection.
Note: Remember to connect the audio cables because the
video cable carries only the picture signal, not the sound.
Back of
DVD/VCR
Coaxial cable
Audio cables (red
and white)
DVD/VCR AUDIO R
and L sockets
Coaxial digital
audio output
Optical cable
Optical digital audio
output
DVD EXCLUSIVE
AUDIO R and L
sockets
DVD/VCR VIDEO
OUT socket
Video cable
DTH6300E_EN 28/05/04 18:48 Page 7