Guidelines

TECHNICOLOR
101West 103
rd
Street
Indianapolis, IN 46290 - USA
phone [phone]
www.technicolor.com/mcs
8) Select the Network Tab
8a) Uncheck 'Enable DHCP' for Static IP address.
8b) Enter an IP address in the same IP scheme of the COM2000 system.
8c) Enter the Subnet Mask.
8d) Enter the Default Gateway (if required).
8e & 8f) Set NTP Server and Select Time Zone (as required).
8g) Save and Confirm all changes.
Note: Installer will loose connectivity after changing the IP address and saving the new settings.
 Remember to set the PC in the same IP Scheme as newly configured IP address of the device.
 The SOAP Port of the device is used as part of the IP address entered into the browser to manage the device
(192.168.6.55:8888)