Guidelines

65535 is the minor channel number that the com24 card is tuned to. This is the minor number for all HD
channels tuned by the COM24 card. The correct minor number to tune the SD version of a given channel
would be 165535.
-hd indicates this is an HD channel
3 is the chassis ID of the chassis with the QAM24 installed. If set to -1 this will disable PSIP generation.
NOTE: In a multi chassis install this value is set to the chassis ID of the chassis that has the QAM24
installed.
17 is the destination port for the channel data. This corresponds to a particular RF channel of the
QAM24
Once you have entered and edited all of the information for your EPG click on the Submit button to
apply the changes. It may take a few minutes for the EPG to get all the data arranged and become
viewable on the channel you have assigned it.
In some cases it may be desirable to have the PSIP data on the RF plant but not necessarily broadcast an
EPG. This can be accomplished by setting everything up as in the previous instructions however you
would set the DestIP: to 1.2.3.4 and the DestPort: to 0.