- Thomson Multimedia MP3 Player User Manual

EN
EN
14
13
Other functions
Firmware Version
•To check firmware version, press M to
bring up the setting menu.
• Select “Version” and press RIGHT
to view the firmware version.
Restore to Defaults
•To restore default settings , press M
to bring up the setting menu.
• Select “Restore Defaults” and press
RIGHT, a warning screen will appear.
•Press SELECT to confirm.
Menu
Shuffle Off
Repeat Off
DSP Flat
Language English
Memory usage >
Version >
Restore Dedaults>
Menu
Shuffle Off
Repeat Off
DSP Flat
Language English
Memory usage >
Version >
Restore Dedaults>
More Information
Restore Dafaults
Are you sure?
Yes
No
Troubleshooting Tips
The player does not turn on when
the PLAY button is pressed?
• Batteries may be inserted incorrectly.
• Batteries may be empty.
Skipping tracks or bad sound
quality?
• Repeat, random or program function
may be activated.
• There may be strong magnetic fields
(e.g. too close to TV) near the unit.
• Low Battery level. Replace with new
ones.
Cannot perform playback?
• LOCK function may be activated.
• There may be no mp3 tracks in the
card or internal memory.
USB display does not appear when
connected to computer?
• Check connection between your unit
and the computer. ( Refer to the “USB
Driver Installation; MusicMatch
Jukebox
TM
Software” instruction
manual)
• Check if the USB drivers are properly
installed ( Refer to the “USB Driver
Installation; MusicMatch Jukebox
TM
Software” instruction manual)
The player does not respond to key
operations?
• Turn the player off by removing the
batteries. Reinsert the batteries
properly and turn the player on
again to resume normal operations.
Note:
For better result, we
recommend a constant encoded bit
rate from 32 to 320kbps for mp3
and 48kbps to 192kbps for Windows
Media Audio.
Nevertheless, your unit may play
tracks encoded in variable bit rate
(VBR).
PDP2352_6 EN 3/21/05 10:38 AM Page 24