- Thomson DVD Player + TV Set + VCR Owner's Manual

Basic playback operations

VCR

Fast Forward / Rewind

Press STOP then press either REV for rewind or FWD for fast forward.

Whilst you are rewinding or fast forwarding you can view the section you are passing. Press and

hold (for a few seconds) either

REV or FWD. Releasing the button will return the video recorder

to normal rewind or fast forward operation.

Variable playback

Use the and buttons to adjust playback speed during playback or for freeze frame. Below is a

list of available speeds:

To resume normal playback, press

PLAY.

Note: During slow motion, noise bars may appear on the picture according to the status of tape. If distortions

can be seen in the picture, reduce them with the and buttons.

Still image

Press the PAUSE button for freeze frame.This picture may display some interference in the form

of black and white horizontal lines.This is perfectly normal and does not mean that the video tape

is damaged.

Notes:

Freeze frame cannot exceed five minutes. After five minutes, the video recorder automatically stops.

You can use the and buttons to reduce any vertical movement seen on the still picture.

Frame Advance

1. Press PAUSE repeatedly to advance forward image by image.

Note:You can use the and buttons to reduce any vertical movement seen on the still picture.

2. Press PLAY to return to playback.

Ejecting the tape

Press OPEN

CLOSE on the remote control or EJECT on the front panel to eject the tape.

Note: If the end of the tape is reached, the video recorder automatically stops, rewinds, ejects the tape and

goes into standby mode.

x 1 = slow motion x 5 = reverse playback 7x speed

x 2 = freeze frame

x 1 = playback 2x speed

x 3 = reverse playback

x 2 = playback 7x speed.

x 4 = reverse playback 3x speed

DTH6300E_EN 28/05/04 18:48 Page 13