User's Manual

8 GUI: Advanced Settings
DMS-CTC-20110909-0007 v0.162
DRAFT
Introduction
The Advanced page allows you to configure the more advanced services of both
the HSG and the Verizon.
To access the Advanced, proceed as follow:
1 On the top menu, click Advanced.
2 The Advanced page appears.
3 On the bottom of this page, click:
 Cantenna Advanced Settings to configure the settings of the Cantenna.
For more information about these settings, read the user documentation of
your Cantenna.
 HSG Advanced Settings to configure the settings of the HSG.
For more information about these settings, read the rest of this chapter.
Utilities
Click:
 Diagnostics to perform diagnostic tests on the HSG.
For more information, see “8.1 Diagnostics” on page 64.
 Restore Defaults to reset the HSG to its default settings.
For more information, see “8.2 Restore Defaults” on page 66.
 Reboot Router to restart the HSG
For more information, see “8.3 Reboot Gateway” on page 67.
 ARP Table to display active devices and their IP and MAC addresses.
For more information, see “8.4 ARP Table” on page 68.
 Users to create and manage users.
For more information, see “8.5 Users” on page 69.
DNS Server
Click DNS Server to manage the local (LAN) network for host name and IP address.
For more information, see “8.6 DNS Server” on page 70.