User's Manual

6 GUI: Firewall Settings
DMS-CTC-20110909-0007 v0.154
DRAFT
Introduction
The firewall controls the flow of data between the local network and the Internet.
Both incoming and outgoing data are inspected and then either accepted (allowed)
or rejected (barred) from passing through according to a set of rules.
To make sure that your entire network is protected the firewall is integrated in the
Cantenna.
Accessing the Cantenna Firewall pages via the HSG
Proceed as follows:
1 On the top menu, click Firewall Settings.
2 The HSG directs you to the Cantenna firewall page.