User's Manual

5 GUI: My Network
DMS-CTC-20110909-0007 v0.150
DRAFT
5.2.5 Broadband Connection (Coax)
Introduction
A Coax Broadband connection connects the HSG Router to the Internet using a
coaxial cable.
The Broadband Connection (Coax) Properties page allows you to view/change
the settings of this connection.
Accessing the Broadband Connection (Coax) Properties page
Proceed as follows:
1 On the My Network menu, click Network Connections.
2 The Network Connections table appears. Click Broadband Connection (Coax)
Properties.
3 The Broadband Connection (Coax) Properties page appears.
Properties
The following properties are available:
 Status:
Displays the status of the coax connection.
 Network:
Displays the type of network.
 Connection Type:
Displays the type of connection.
 MAC Address:
Displays the unique hardware address of this interface.
 IP Address Distribution:
To change the value, click IP Address Distribution. For more information, see
“8.10 IP Address Distribution” on page 75.
 Channel:
The channel used by the coax connection.
Changing the properties
Clicking Settings allows you to change: