User's Manual

4
The use of other types of supplies is prohibited. If you are not sure of the
type of power supply needed, consult the product's user documentation or
contact your local product dealer.
USB
The device is to be connected to an identified USB port complying with the
requirements of a Limited Power Source.
Accessibility
The Direct Plug-in power supply, or the plug on the power supply cord
serves as disconnect device. Be sure that the power socket outlet you plug
the power supply into is easily accessible and located as close to the
equipment as possible.
Overloading
Do not overload mains supply socket outlets and extension cords as this
increases the risk of fire or electric shock.
Servicing
To reduce the risk of electric shock, do not disassemble this product. None of
its internal parts are user-replaceable; therefore, there is no reason to
access the interior. Opening or removing covers may expose you to
dangerous voltages. Incorrect reassembly could cause electric shock if the
appliance is subsequently used.
If service or repair work is required, take it to a qualified service dealer.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
 When the power supply or its plug are damaged.
 When the attached cords are damaged or frayed.
 If liquid has been spilled into the product.
 If the product has been exposed to rain or water.
 If the product does not operate normally.
 If the product has been dropped or damaged in any way.
 There are noticeable signs of overheating.
 If the product exhibits a distinct change in performance.
FOR APPROVAL