User's Manual

Table Of Contents
88
System
Use the “System” section of this screen to configure the following two options:
Wireless Broadband’s Hostname - Specify the TG590’s host name by entering it into the text box. The host
name is also the TG590’s URL address, so it can be entered here rather than 192.168.1.1.
Local Domain - Specify the network’s local domain by entering it into this text box.
Wireless Broadband
Use this section to configure the following:
Automatic Refresh of System Monitoring Web Page - Click in this check box to activate the automatic refresh
of system monitoring web pages.
Prompt for Password When Accessing via LAN - Click in this check box to cause the TG590 to ask for a
password when trying to connect to the network.
Warn User Before Network Configuration Changes - Click in this check box to activate user warnings before
network configuration changes take effect.
Session Lifetime - After the TG590 has been inactive for a period of time, the user must reenter a user name
and password to continue accessing the GUI. To change the length of this time period, enter the amount of
time (in seconds) in the “Session Lifetime” text box.
Configure a number of concurrent users… - Used to limit the number of users that can access the TG590 at the
same time. Select the number of users from the drop-down list.