User's Manual

E-DOC-CTC-20090105-0001 v0.1

1 Installation

1.2.2 Manual Installation

Procedure

Proceed as follows:

1 Connect the cables

2 Configure the Thomson Gateway

Connect the cables

Proceed as follows:

1 Connect the Thomson Gateway to the DSL line.

2 Connect the power supply.

3 Turn on the Thomson Gateway.

4 Connect your computer to the Thomson Gateway as described in “1.3 Adding a New Computer to your

Network” on page 9.

Configure the Thomson Gateway

Proceed as follows:

1 Open your web browser.

2 The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.

If this window does not appear browse to http://dsldevice.lan

or to the IP address of your Thomson

Gateway (by default: 192.168.1.254) and click Thomson Gateway on the menu on the left-hand side.

3 Click Setup my Thomson Gateway.

4 The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson

Gateway. Click Next and follow the instructions.