User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
8
Security Zone Function Description Sensor Types
button. Sends a report to the central station, but provides
no keypad display or sound.
Audible 24-Hour Usually assigned to a zone containing an emergency
button. Sends a report to the central station and provides
an alarm sound at the keypad as well as an audible external
alarm.
Door/window
sensor
Trouble Day/Alarm Night Provides an instant alarm if faulted when armed in Alarm
Away mode.
Door/window
sensor
Understanding Alarms
When an alarm is tripped an audible alert is sounded. From that point, you have a specific amount of
time (default: 30 seconds) to enter your keypad code or an alarm will sound. If a valid keypad code is not
entered within a specific time of the audible alarm sounding, a message is sent to a central monitoring
station. See "Disarming the System & Understanding What Happens During an Alarm" on page 30 for
more information.
The central monitoring station will attempt to contact the persons listed on the account. When they
reach a person listed on the account, they will ask for the Secret Word to affirm whether a genuine
emergency is occurring. If no one on the list can be contacted, or if the person contacted gives the wrong
Secret Word, the central monitoring station immediately dispatches police or other appropriate
emergency personnel.
If the alarm is not cleared within 4 minutes, the system resets so it can monitor additional alarm events.
If a sensor is faulted too many times resulting in alarms, no more alarms will be sent to central
monitoring for 48 hours or until the security system is disarmed.
Configuring the TouchScreen
You can use the Settings app to access a variety of operations to configure and maintain your security
system.
Note: You cannot access the Security app if the security system is armed.
To access the Settings app:
1. From the Home screen (see page 20) tap the Settings app.
The Keypad screen is displayed.
TouchScreen User Guide