User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
Maintaining & Configuring the TouchScreen Device
75
You can also configure the volume at which the TouchScreen sounds are played.
To set the tones that the TouchScreen uses when zone events occur:
1. From the Settings menu (see "Configuring the TouchScreen" on page 8), tap
TouchScreen > Sound Configuration > Hometone Configuration.
The Sound Settings Configuration screen is displayed.
Red icons(for example for door being opened) designate the sound played when a zone is
faulted.
Green icons (for example for a door being closed) designate the sound played when a zone is
cleared.
2. Tap a field to display a menu of sounds to play when a zone is faulted or cleared.
3. Tap Silence to have the TouchScreen never play a tone when the associated security zone is
faulted.
To set the volume of a tone:
1. From the Settings menu (see "Configuring the TouchScreen" on page 8), tap
TouchScreen > Sound Configuration > Volume Configuration.