User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
74
Configuring the Screensaver
You can configure the TouchScreen to display a screen saver after the device has been inactive for some
period of minutes.
See also "Understanding and Configuring Screen Brightness & Screen Dimming" on page 71 for how to
have the screen dim to a configured level after a period of inactivity. This can be used instead of a
screensaver or in conjunction with a screensaver.
To configure the TouchScreen screensaver:
1. From the Settings menu (see "Configuring the TouchScreen" on page 8), tap TouchScreen >
Screensaver Configuration.
The Screensaver Configuration screen is displayed.
2. Tap the Start Screensaver arrow buttons to choose the number minutes of inactivity before the
TouchScreen will start the screensaver. The options are in five minute increments. The maximum
number of minutes is 30 and the least is 5.
3. In the Select Screensaver App menu, tap the app that will be used as a screensaver.
Table 11: Commonly Used Screensavers
Control Description
None The screen never goes to screensaver.
Security Screen displays the Arm System tab from the Security app.
Camera Displays stills of the cameras attached to the security system (updated every 5 seconds). If
there is only one camera attached to the security system, it displays live video.
Clock Displays the current time in digital or analog.
Blank Displays a blank screen
Photos Displays a slideshow of photos from your Flickr account.
Configuring the Tones and Volume Levels
You can configure the sounds the TouchScreen plays when a security zone is faulted or cleared.
TouchScreen User Guide