User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
Maintaining & Configuring the TouchScreen Device
73
To configure the screen to dim completely during a set time period (Night Mode):
Note: When a user touches the screen, it will brighten to its default brightness level.
Note: At the set time range, the screen will dim to its lowest setting (1).
1. From the Settings menu (see "Configuring the TouchScreen" on page 8), tap TouchScreen >
Screen Configuration.
The Screen Configuration menu is displayed.
2. Tap Screen Nighttime Settings.
Some backlight controls are provided.
Table 10: Screen Night Mode Settings Controls
Control Description
Backlight
off at night
Yes The screen will dim during the configured time range.
No The screen will not dim during the configured time period. If it is con-
figured to dim after a period of inactivity, that will still happen.
Backlight
off time
Time that the screen automatically dims to level 1.
Backlight
on time
Time the screen automatically brightens to default level.