User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
66
2. Tap Lighting > Delete Lights.
The Settings screen is displayed showing an icon for each connected lighting device.
3. Tap the icon of the lighting device you want to remove.
A confirmation is displayed:
Deleting a light device cannot be undone. Are you sure you want to delete the [lighting device
label].
4. Tap Yes.
Managing Thermostats
You can have up to 4 thermostats connected to a TouchScreen at a time.
To control your thermostats:
1. From the Home Screen, tap the Thermostats app.
In the Thermostat app, you can set the mode to Cool, Heat, or Off.
2. Toggle the Hold button to maintain the mode you set and ignore any other programming con-
figured on the thermostat device.
IMPORTANT:Rules for a thermostat on Hold will not run.
3. Toggle the Fan button to turn the blower either on or off.
TouchScreen User Guide