User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
56
The Camera Wi-Fi Connection Test screen is displayed.
Figure 12: Camera: Camera Wi-Fi Connection Test Screen
10. To have the camera connected to the TouchScreen wirelessly, follow the instructions in the Cam-
era Wi-Fi Connection Test screen (including disconnecting the camera from the TouchScreen
router and rebooting the camera) and tap Locate Camera.
11. When the camera has been paired wirelessly to the TouchScreen, tap Next.
The Adjust Camera screen is displayed.
Figure 13: Camera: Adjust Camera Screen
12. Point the camera as needed.
13. Tap Next.
The Add Additional Camera screen is displayed.
TouchScreen User Guide