User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
Managing Your System Security
45
The TouchScreen re-configures the security network router DMZ to hide any connected router
from access by entities in the Internet.
View Your Security Account Information
To view your account information:
1. From the Settings app (see "Configuring the TouchScreen" on page 8), tap Advanced Settings >
Account Information.
The Validate Account Information screen is displayed.
2. Go to the Subscriber Portal to view your account information, or contact Customer Care to modify
it.
3. Tap Return to Menu to return to the Settings menu.
Managing Sensors
You cannot add or delete the sensors in your security system, but you can control how they appear in
reports, your TouchScreen and the Subscriber Portal.
You can:
Have a sensor not monitored when the system is armed (see page 45)
View your security zone event history (see page 46)
Change the order that security zones are listed in the TouchScreen (see page 47)
Disable a Sensor
You can turn a zone off, which means the zone is not monitored when the system is armed. This is useful
during periods when a sensor is being repaired. You can turn a zone off only when the system is
disarmed.
The system continues to log the activity of zones that are turned off in the Event History (see Viewing
Your Zone Event History on page 46).