User's Manual
Table Of Contents
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- Managing Connectivity between Your Home Devices and the Internet
- View Your Security Account Information
- Managing Sensors
- Managing Cameras
- Adding Cameras to the Security System
- Adding Key Fobs to the Security System
- Editing Key Fobs
- Managing Environmental Devices
- Managing Wi-Fi Repeaters
- Maintaining & Configuring the TouchScreen Device
- Appendix A: TouchScreen Installation and Maintenance
- Appendix B: Using the Key Pad
- Appendix C: Wi-Fi Repeater Placement
- Appendix D: Quick Reference Tables
Using the TouchScreen
15
Tap to mark the trouble as acknowledged . An acknowledged trouble mutes the audible alerts
for twelve hours. After that time, the trouble begins the alert again. You must acknowledge it by tapping
the OK button again to silence the alerts.
From the resolution information, you can:
Tap Return to view the Troubles list again where you can choose to acknowledge the current trou-
ble or view the resolution information for other troubles.
Tap Acknowledge Problem to acknowledge the current trouble immediately and return to the
Troubles list.
The following table lists messages that can be displayed in the trouble header .