User's Manual

12 TouchScreen Quick Start Guide
Cancelling the Arming Process
If you arm the system in Arm Away or Arm Stay mode, the Security Status header displays a countdown
of the number of seconds until the Exit Delay is over. You can choose to cancel the arming process.
To cancel the arming process:
1. Tap the Security Status header while it is displaying a countdown.
The Security app is displayed with a keypad and the Disarm System tab active. The view from
the camera(s), if any, is displayed.
2. Enter your security code to stop the arming process.
Disarming the System
When you enter an armed premises, an Entry Delay period starts:
l During the Entry Delay, the header changes to announce the number of seconds before the
alarm goes off.
l The Security app screen displays either the camera associated with the security zone where you
entered the premises or the default camera, if no camera is associated with that zone.