User's Manual
Table Of Contents
- Managing Sensors & Zones
- Maintaining Sensors
- Resetting Sensors to Factory Default
- Managing Cross-Zone Associations
- Managing Sirens
- Managing Cameras
- Managing Thermostats
- Managing Lights
- Managing Key Fobs
- Managing Key Pads
- Managing Panel Interfaces
- Managing Wi-Fi Repeaters
- Replacing a TouchScreen
- Replacing the Security Network Router
- Troubleshooting Router Swapping
- Appendix A: General Concepts of the Security System
- Appendix B: General Info for Sensor Placement
- Appendix C: Replacing the TouchScreen Battery
- Appendix D: Using the Key Pad
- Appendix E: Installer Quick Reference (SIA)
98
6. When all the sensors are found and paired, tap Done.
The system notes the number of wireless sensors found and paired.
7. Tap Next.
The Configure Wireless Sensors screen is displayed.
8. Tap each sensor icon to configure it.
The details that are available for configuration vary based on the type of sensor being
configured.
See Table 2: Security Zone Functions on page 28
To modify a text field such as the Zone Label, tap the field to display a keyboard.
9. When all the sensors are properly configured, tap Next in the Configure Wireless Sensors screen.
Deleting Sensors
To delete a sensor to the security system:
1. Contact Customer Care to get the Premise Passphrase for the current customer’s account.
2.
From the Installer Settings menu, tap Sensors & Zones ® Delete a Sensor/Zone.
Home System Installation Guide