User's Manual
Table Of Contents
- Managing Sensors & Zones
- Maintaining Sensors
- Resetting Sensors to Factory Default
- Managing Cross-Zone Associations
- Managing Sirens
- Managing Cameras
- Managing Thermostats
- Managing Lights
- Managing Key Fobs
- Managing Key Pads
- Managing Panel Interfaces
- Managing Wi-Fi Repeaters
- Replacing a TouchScreen
- Replacing the Security Network Router
- Troubleshooting Router Swapping
- Appendix A: General Concepts of the Security System
- Appendix B: General Info for Sensor Placement
- Appendix C: Replacing the TouchScreen Battery
- Appendix D: Using the Key Pad
- Appendix E: Installer Quick Reference (SIA)
96
3. Tap a field to change it.
Touching menu fields display a menu of items. Touching text fields displays a keyboard screen to
change a label.
4. Tap Next to move through the wizard.
5. Tap Return to Menu when the sensor modifications are complete.
Adding Sensors
To add a sensor to the security system:
A sensor must meet the following requirements before it can be added to the security system:
Defaulted
Not currently paired with another TouchScreen device
Note: To unpair a sensor from the current TouchScreen, you must delete it (see 98).
Currently in Search mode
1.
From the Installer Settings menu, tap Sensors & Zones ® Add a Sensor/Zone.
The Locating Wireless Sensors screen is displayed.
Home System Installation Guide