User's Manual
Table Of Contents
- Managing Sensors & Zones
- Maintaining Sensors
- Resetting Sensors to Factory Default
- Managing Cross-Zone Associations
- Managing Sirens
- Managing Cameras
- Managing Thermostats
- Managing Lights
- Managing Key Fobs
- Managing Key Pads
- Managing Panel Interfaces
- Managing Wi-Fi Repeaters
- Replacing a TouchScreen
- Replacing the Security Network Router
- Troubleshooting Router Swapping
- Appendix A: General Concepts of the Security System
- Appendix B: General Info for Sensor Placement
- Appendix C: Replacing the TouchScreen Battery
- Appendix D: Using the Key Pad
- Appendix E: Installer Quick Reference (SIA)
148
The Edit System Configuration Information screen is displayed.
8. Change the Broadband Server IP, Cellular Server IP, and the Cellular APN values by touching them
to display a keyboard in the screen. Enter the new values and tap Done.
9. After all the values have been set, tap Next.
The System Information screen is displayed.
10. Tap Next.
The Welcome Screen is displayed.
11. Tap Next.
The Connectivity Setup screen displays the type of Internet router to which the TouchScreen will
connect.
Home System Installation Guide